‘Doors rear’ or ‘doors front’? New Melbourne terminal makes life hard for truckies

‘Doors rear’ or ‘doors front’? New Melbourne terminal makes life hard for truckies

Container transport operators have been working closely with Victoria International Container Terminal (VICT) ahead of the arrival of the first laden ship to be stevedored at the new automated container terminal in Webb Dock, Melbourne.

“E.R. Long Beach” operating for Mediterranean Shipping Company (MSC) on the Australia Express service to/from Asia, the Middle East and Europe, is due to berth at VICT on 26th February.

At 300 metres in length, with a width of 42m and a container capacity of 7,455 TEU, E.R. Long Beach presents challenges in accessing Swanson Dock due to her size.  Hence, MSC is taking advantage of VICT’s ability to handle larger container ships without the need for the Yarra River passage.

“Export container receivals for the vessel commence in earnest from Monday, 20th February.  This has necessitated container transport operators registering with VICT through 1-Stop to use the Vehicle Booking System (VBS), and drivers completing their on-line MSIC inductions (again through 1-Stop) before they can access the Terminal,” commented CTAA director Neil Chambers.

Road transport interface issues

The announcement that VICT was to welcome its first laden container vessel added emphasis to the discussions between CTAA Alliance companies and VICT on outstanding transport interface issues.

“We’ve got some major issues we are still working through collaboratively with senior management at VICT, ones that impact on truck servicing and productivity,” Mr Chambers noted.

“Key among these issues is the instruction from VICT that all containers be delivered ‘doors rear’. This accommodates the operation of the Automated Stacking Cranes (ASC) and the presentation of containers through the automated system to the ship’s side for loading ‘doors rear’.  Similarly, import containers will be loaded onto trucks ‘doors rear’.

“Unfortunately though, this has major implications for road transport operators being compliant with heavy vehicle axle weight restrictions.  In addition, it impacts on exporter and importer instructions where the container doors may need to be orientated differently, particularly when side-loaders are used.”

“In other Australian container terminals employing similar Stacking Crane technology (i.e. DP World, Port of Brisbane), the stevedore provides a service to turn boxes, with an associated fee.  We want VICT to do the same.”

To assist in understanding the scale of the issue, CTAA is conducting a survey of Melbourne container transport operators to gauge the frequency of containers being delivered and picked up from stevedore terminals ‘doors front’.

“It’s a major issue, particularly for our heavy agricultural exports.  We need to find a solution that doesn’t reduce landside productivity and efficiency, or drives up costs unduly,” Mr Chambers said.

Other issues being addressed include several fees to be imposed by VICT, and the management of container weight and truck weight information.

VICT will weigh all export containers, and will compare the declared weight against the actual weight recorded.  Where the declared container verified gross mass (VGM) varies by more than 500kg, VICT will update the gross mass information used for ship loading.

“VICT planned to impose a charge of $130.00 on the container transport operator for the VGM update administration.  In our view, however, the pre-receival advice (PRA) declarant should be charged this fee, as they are responsible by law to declare the VGM,” Mr Chambers said.

“Also, we are encouraging VICT to pass on mis-declared weights information to the Australian Maritime Safety Authority (AMSA) for enforcement action.

“To its credit, VICT has agreed to suspend the VGM Update Fee whilst investigations continue as to how best to impose the fee on the parties responsible in the supply chain for the accurate declaration of export container gross mass,” Mr Chambers said.

“We are also working through the issue of the practical use of the truck weigh-in-motion devices that will provide axle group and overall vehicle weights to the driver as they depart the terminal.”

“We are assisting VICT to organise a discussion with VicRoads and the National Heavy Vehicle Regulator (NHVR) about meeting their “loading manager” obligations under the Chain of Responsibility provisions in the Heavy Vehicle National Law (HVNL).

“Given the considerable variables in axle and gross loading limits depending on vehicle combination, mass accreditation and permits, the heavy vehicle driver has the direct responsibility to ensure that they do not carry the load on a public road unless they are within the weight limits allowed.  The weigh-in-motion read-out will provide accurate information to the driver.  If containers need to be removed, the terminal is clearly entitled to charge for that additional service.” Neil Chambers said.

“The 1-Stop vehicle booking system (VBS) will also work differently at VICT than it does at the two incumbent stevedores in Melbourne.  This may take some getting used to, and fleet controllers will need to become familiar with the differences.

“The good thing is that the ‘mad minute’ created by the daily time slot-drop orchestrated by the other stevedores is removed.  However, for imports, you can only book a slot once the container is discharged and its yard position is known.  The way transport companies schedule their fleet operations will need to adapt accordingly.

“With goodwill and continued communications, we are confident that we will be able to work with VICT collaboratively to smooth the land transport / terminal interface as operations at the new automated facility at Webb Dock get underway in earnest,” Mr Chambers said.

 

You may also like to read:


,

Comments are closed.

Newsletter

Sign up with your business email address to keep up with the latest industry news from T&L. Newsletter sent every week.

Most Read

Kalmar launches 9-18t lithium battery electric forklifts
Kalmar, part of Cargotec, has introduced a medium electric f...
Technology => efficiency – from MHD magazine
Bart De Muynck Government regulations requiring greater com...
The SMART Distribution Centre opens
Schneider Electric has successfully completed the digital tr...
Australian retail: officially in recession
Phil Chapman “GFC-level terrible.” Those were the wo...
Moving with the times – from MHD magazine
Peter O’Connor Data warehouses are far from new. The term...
Own the future – from MHD magazine
Martin Kohl The distribution centre of the future will need...

Supported By